Carro 2WD Arduino 3D

 Nesta postagem vamos montar e programar um carro 2WD que desvia de obstáculos;

Para o projeto iremos utilizar:

-  Kit Chassi 2WD;

-  2 motores com redução;

-  Arduino uno;

-  Sensor ultrassônico HC-SR04; 

-  Suporte para sensor ultrassônico;

-  Driver motor Ponte H L298n ;

- Servo 9g;

-  Suporte para pilhas AA;

- Jumpers macho/macho;

- Jumpers macho/fêmea;

- Jumpers fêmea/fêmea;

Faça a montagem do chassi;

Faça a ligação eletrônica conforme desenho abaixo:

Obs: Se na hora de testar  as rodas tiverem rotação invertida, inverta as ligações aos pinos digitais.

Copie e cole o código no arduino no IDE e carregue o programa no arduino ou acesse o link com o código AQUI, 

Obs: Adicione as bibliotecas Servo.h e NewPing.h ao arduino IDE, caso não tenha;

#include <Servo.h>          //Servo motor library. This is standard library
#include <NewPing.h>        //Ultrasonic sensor function library. You must install this library

//our L298N control pins
const int LeftMotorForward = 7;
const int LeftMotorBackward = 6;
const int RightMotorForward = 4;
const int RightMotorBackward = 5;

//sensor pins
#define trig_pin A1 //analog input 1
#define echo_pin A2 //analog input 2

#define maximum_distance 250
boolean goesForward = false;
int distance = 150;

NewPing sonar(trig_pin, echo_pin, maximum_distance); //sensor function
Servo servo_motor; //our servo name


void setup(){

  Serial.begin(9600);

  pinMode(RightMotorForward, OUTPUT);
  pinMode(LeftMotorForward, OUTPUT);
  pinMode(LeftMotorBackward, OUTPUT);
  pinMode(RightMotorBackward, OUTPUT);
  
  servo_motor.attach(10); //our servo pin

  servo_motor.write(115);
  delay(2000);
  distance = readPing();
  delay(100);
  distance = readPing();
  delay(100);
  distance = readPing();
  delay(100);
  distance = readPing();
  delay(100);
}

void loop(){

  int distanceRight = 0;
  int distanceLeft = 0;
  delay(50);

  if (distance <= 20){
    moveStop();
    delay(300);
    moveBackward();
    delay(400);
    moveStop();
    delay(300);
    distanceRight = lookRight();
    delay(300);
    distanceLeft = lookLeft();
    delay(300);

    if (distance >= distanceLeft){
      turnRight();
      moveStop();
    }
    else{
      turnLeft();
      moveStop();
    }
  }
  else{
    moveForward(); 
  }
    distance = readPing();
}

int lookRight(){  
  servo_motor.write(50);
  delay(500);
  int distance = readPing();
  delay(100);
  servo_motor.write(115);
  return distance;
}

int lookLeft(){
  servo_motor.write(170);
  delay(500);
  int distance = readPing();
  delay(100);
  servo_motor.write(115);
  return distance;
  delay(100);
}

int readPing(){
  delay(70);
  int cm = sonar.ping_cm();
  if (cm==0){
    cm=250;
  }
  return cm;
}

void moveStop(){
  
  digitalWrite(RightMotorForward, LOW);
  digitalWrite(LeftMotorForward, LOW);
  digitalWrite(RightMotorBackward, LOW);
  digitalWrite(LeftMotorBackward, LOW);
}

void moveForward(){

  if(!goesForward){

    Serial.println("==moveForward==");

    goesForward=true;
    
    digitalWrite(LeftMotorForward, HIGH);
    digitalWrite(RightMotorForward, HIGH);
  
    digitalWrite(LeftMotorBackward, LOW);
    digitalWrite(RightMotorBackward, LOW); 
  }
}

void moveBackward(){

  goesForward=false;

  Serial.println("==moveBackward==");

  digitalWrite(LeftMotorBackward, HIGH);
  digitalWrite(RightMotorBackward, HIGH);
  
  digitalWrite(LeftMotorForward, LOW);
  digitalWrite(RightMotorForward, LOW);
  
}

void turnRight(){

  Serial.println("==turnRight==");

  digitalWrite(LeftMotorForward, HIGH);
  digitalWrite(RightMotorBackward, HIGH);
  
  digitalWrite(LeftMotorBackward, LOW);
  digitalWrite(RightMotorForward, LOW);
  
  delay(500);
  
  digitalWrite(LeftMotorForward, HIGH);
  digitalWrite(RightMotorForward, HIGH);
  
  digitalWrite(LeftMotorBackward, LOW);
  digitalWrite(RightMotorBackward, LOW);
 
  
  
}

void turnLeft(){

  Serial.println("==turnLeft==");

  digitalWrite(LeftMotorBackward, HIGH);
  digitalWrite(RightMotorForward, HIGH);
  
  digitalWrite(LeftMotorForward, LOW);
  digitalWrite(RightMotorBackward, LOW);

  delay(500);
  
  digitalWrite(LeftMotorForward, HIGH);
  digitalWrite(RightMotorForward, HIGH);
  
  digitalWrite(LeftMotorBackward, LOW);
  digitalWrite(RightMotorBackward, LOW);
}

Acione o carro e boa diversão.

Obs: O código é preparado para acionar um servo que movimenta o sensor, caso queira aprimorar o projeto.